High Pressure Pump Mini PCP Air Compressor 4500 PSI 300 Bar
High Pressure Pump Mini PCP Air Compressor 4500 PSI 300 Bar
Max Pressure 35mpa youtube. Com/watch? Transit may be let go of the oil, check the oil level before use. If there is no oil, add the No. 100 reciprocating air compressor lubricants (or 5w-40 oil). Before using the oil plug is removed, put on breathing oil stick. When using the pumps must be connected. If the error is likely to cause damage to the product. 1, the water must be added using mechanical. 2, pay attention to the oil level should be the appropriate place on the edge of the red dot. 3, our pump is zero pressure start, if you need to use half-way down, then start again the need to relief screw worked loose off after the pressure inside the machine let go to start. 4, note the use of temperature, generally not more than 55 degrees. Do not trespassing at transformation, not by the person other than the repair technician to disassemble, repair. 6, before use to ensure strip 8A can withstand more than the current, it may be because the outlet line overload caused by burning, product damage or danger. 7, after using the machine just do not touch the nose section, so as not to cause burns. Do not leave the inflated, or it may not reach the working pressure due later failed to shut down, causing the pressure continues to rise, the motor is continuously overloaded and even downtime resulting in product damage. 9, for the larger volume of the container is inflated, preferably 30 minutes after each use to change the primary cooling water, so you can better control the cylinder temperature. 1, the product removed, the hose is mounted outlet Note: Check whether the gasket inside the threaded hole. 2, the two cooling water pipe connected and connect the pump. NOTE: The following is a tube connected to the pump inlet, the product used for the submersible pumps, pumps need to be immersed in water use. 3, install pressure relief valve screws and drain valve screws, screw mounted relief relief hole in the hose below. Drain valve installed in a gas chamber plate outfall. 4, the pump into the water and through the power supply. 5, the connection should be inflated containers and ensure that the connection is correct. Tighten the drain valve and pressure relief valve screws. 7, switch on the machine running. Note: When the machine is running the pump must be in working condition, it may be because the product overheat and cause damage or even cause injury. 8, after the end of the inflatable pressure relief valve should loosen the screw, and then turn off the switch, turn off the power to avoid sudden pressure gas recoil lead to product damage and prolong life, but also ruled out the body of the high-pressure gas. The product has excellent quality and convenience you would expect. Product Configuration high-pressure rubber hoses, to apply to a variety of uses. Modular cylinder secondary product uses compression, displacement, inflatable fast, not only can be used for firefighting diving cylinders may also be used in cars, vans, trucks, cars and so on. A machine for a wide range, random with a universal quick connect and inflatable mouth, in addition to inflatable bottle, can also be used in automobiles, motorcycles, electric cars and other vehicles. The item “High Pressure Pump Mini PCP Air Compressor 4500 PSI 300 Bar” is in sale since Thursday, December 17, 2015. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “xuejun2015″ and is located in , . This item can be shipped worldwide.
- Type: 11111
- Brand: JKC
- MPN: 11111
- Model: JKC2
- Country/Region of Manufacture: China