Air Compressor PUMP Sears Red Compressor 106.173842 Cast Iron USA Made 1-3HP
Sears RED Compressor PUMP VT Series Rebuilt with complete rebuild kit. All parts hot tanked. All outside glass peened. (I left the original Classic “GREEN” on the end of the crank). All new paint job with high temp engine enamel (Semi matte black). Cylinders de-glazed very lightly with 400 stones in an oil bath. All new Gaskets sprayed with copper high temp sealer. NEW HEAD (replacement – head, valve plate, seals and gaskets). All bolts siliconed on threads for leak proofing. All bolts torqued BROKEN IN ALREADY (Shown mounted on one of my compressors in the break-in process). (rings will need several months of normal use to fully seat, and then oil should be changed again). Empty tank to Full Tank averaged 3 minutes 6 seconds to 115 psi which is similar to new for 2 HP 20 gal tank. These mid size pumps would like at least 1 HP, 2 HP and 3 HP is common, 4 HP and 5 HP sometimes. Pictures of pump mounted on one of my compressors for break in. THIS ONE is made in AMERICA – ALL of the new ones are made in CHINA!!! NEEDS TO BE FILLED WITH COMPRESSOR OIL OR 30 WEIGHT NON-DETERGENT MOTOR OIL BEFORE USE. (fill to bottom of fill hole threads only, do not overfill). Take note of the belt type used in picture of pulley. Take note of the use of an auto unloading check valve used in this setup. (there is no tap in this head for the 1/8 un-loader tube used in some set-ups and alternate unloading method MUST be used). Mounting holes are standard 5 7/8″ x 6 1/2″. As pictured, as described – fully tested in normal operating conditions. 4 units available this is pump # 3 Thanks for looking, see our other listings for more STUFF. The item “Air Compressor PUMP Sears Red Compressor 106.173842 Cast Iron USA Made 1-3HP” is in sale since Thursday, September 08, 2016. This item is in the category “Home & Garden\Tools\Air Compressors”. The seller is “1hobbyman1″ and is located in Ann Arbor, Michigan. This item can be shipped to United States.