US 30MPA High Pressure Air Pump Electric PCP Compressor Airgun Scuba Rifle Tool
US 30MPA High Pressure Air Pump Electric PCP Compressor Airgun Scuba Rifle Tool
THANKS FOR YOUR UNDERSTANDING. NO WORRY, WE WILL HELP YOU! Equipped with high pressure rubber hose, suitable for a variety of uses. Superimposed two-cylinder two-stage compression has the characteristics of large displacement and. Fast inflation, which can be used not only for diving fire cylinders, but also for cars, trucks, trucks and. One machine has many uses and a wide range of applications. The machine comes with a universal quick connection and charging connector. In addition to inflatable bottles, it can also be used for automobiles, motorcycles, electric vehicles. Applications: fire fighting, diving, leak detection, pressure testing, automotive, etc. The pressure value can be set arbitrarily, and it will stop automatically after reaching the set pressure. 100% brand new with high quality. Air Flow Rate: 40-50L/MIN; 1.5-1.8CFM. Cooling System: Water Cooling. Compression Stage: Two Stage. Lubrication Mode: Splash Type. Material of Cover: Cast Aluminum. Shout down: Manual stop/automatic stop(for optional). Lubricating oil: ISO VG46 or AW 46. Air hose connection: 8mm quick connect fitting. Take out the product; install the hose at the air outlet. Note: gasket is needed, or air leakage might exist. Connect 2 cold water pipes and connect them to the water pump. Note: the lower pipe connected to the water pump is water inlet. Sinking pump is used in this product. The water pump should be immersed in water for using. Install the pressure relief valve screw. Pressure relief valve screw is installed at the pressure relief hole under the hose. The blow-down valve is installed at the drain outlet of the first air chamber block. Immerse the water pump in water and switch on the power. Connect the container need to be inflated, make sure the connection is correct. Screw up the screws of the blow-down valve and pressure relief valve. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly. Or the product might be damaged due to overheated, personal harm may even occur. After the inflation is completed, screw of the pressure relief valve should be firstly loosen. Then the power is to be switched off, by doing so, high pressure. Air backlash caused due to sudden failure of power supply would be avoided. Which could lengthen lifetime of the product, as well as discharge high pressure air in the machine. 1 x 30Mpa Electric Compressor Pump. 1 x Water Pump. 2 x Water Pipe. 1 x Hose Female. 1 x Air cock. 2 x Pressure relief screw. 1 x Wearing parts. 1 x English Manual. Please use the power supply according to the parameter table. If abnormal noise occurred during the using of the product. Please stop using it instantly and check the cause. The product should be placed at a place that it couldn’t be touched by children. Please do not use it in moist and flammable place. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed. Make sure the socket could withstand a currentgreater than 8A before using it. Or the circuit might be burnt, the product might be damaged and the dangers may be caused. Due to overload of the socket. Please do not touch the head section after the machine was just being used, so as to not beburnt by. Please do not leave without authorized. Or the product might be damaged by increasingly rising pressure, sustained overload motor. Even halt due to the operation pressure has reached but it is not turned off timely. When it is used for inflating slightly larger container. The cooling water should be changed every 30 minutes, in this way, the cylinder. Temperature could be better controlled. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the. If color of machine oil becomes dark and black, it should be changed in tim. The colors may be a little difference for the different monitor display. Please check as much as possible to make sure the item is the one that you need. Please allow 0.5-1 inch difference due to manual measurement. The item “US 30MPA High Pressure Air Pump Electric PCP Compressor Airgun Scuba Rifle Tool” is in sale since Friday, April 16, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Other Air Compressors”. The seller is “magicalstore99″ and is located in Los Angeles, California. This item can be shipped to United States.
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: Unbranded
- Noise: MAX 85DB
- Inflating Speed: 2800R/Min
- Power Rating: 1.8KW
- Working Pressure: 100-300BAR; 1500-4500PSI
- Filtration: Water/oil separator
- Cooling System: Water Cooling
- Material of Cover: Cast Aluminum
- Air Flow Rate: 40-50L/MIN; 1.5-1.8CFM
- UPC: Does Not Apply
- Compression Stage: Two Stage
- Lubrication Mode: Splash Type
- Modified Item: No
- Power: 220V 50HZ
- Shout down: Manual stop/automatic stop(for optional)
- Type: High Pressure Air Compressor
- Lubricating oil: ISO VG46 or AW 46