4 HP Single-Stage Replacement Air Compressor Pump 3 Cylinder Head 12.7 CFM Max
4 HP Single-Stage Replacement Air Compressor Pump 3 Cylinder Head 12.7 CFM Max
4 HP Single-Stage Replacement Air Compressor Pump 3 Cylinder Head 12.7 CFM Max. Note: The pulley speed should not exceed 1000r/min. Description: This air compressor pump has high hardness, tensile strength, and compression resistance, allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency. Specification: Colour: Black Material: Cast Iron, Aluminum Power Source: Electric Cylinder: 65mm3 Maximum Working Pressure: 0.8MPa/115PSI Maximum Speed: 1030rpm Exhaust Volume: 0.36m³/min/12.7cfm Pipe Interface: 19mm/ 3/4in Matching Motor Power: 3KW/4HP Gross Weight: 21kg/46.29 lbs Package Size: 443338cm/17.3212.9914.96in. Package Included: 1Air Compressor Pump 3Air Filter Mufflers Notes: – It should match the motor power. Please pay attention to the product specifications before ordering. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration. After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt. The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time. The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time. Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month. The operation of the machine will produce high temperature, please be careful not to burn! – Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. The extended cylinder increases the stroke to achieve rapid inflation. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to Videstar88, our services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time) 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time.