Professional PCP Air Compressor High Pressure Filter
Professional PCP Air Compressor High Pressure Filter
A practical choice for buyers looking for gx-pump professional-grade high pressure pcp air compressor filter. Why Choose GX PUMP? Compared to the small, boxy compressors on the market, GX features a patented structural design for the CS2, CS3, CS4, and 5K models, with different compression mechanisms. Years of continuous improvement, such as the addition of roller bearings at the top of the connecting rod, allow for better movement and less wear on the rod and wrist pin, significantly extending service life and enhancing performance under high pressure. Heavy-Duty Aluminum Construction: Crafted from seamless aerospace-grade aluminum alloy with 10mm thickened walls (9.68mm actual), this industrial-strength filter withstands 5800 PSI pressure while featuring anti-slip texture for secure grip and scratch resista. Ultra-Efficient Filtration System: Dual-layer purification with activated carbon + molecular sieves removes 99% of oil, water, and microparticles (down to 0.01? M), delivering clean air output to protect your PCP rifles from moisture damage. Universal Compatibility :M10×1 thread & 8mm quick-connect design works flawlessly with GX pumps (CS1/CS2/CS3/CS4-5K), and other brands 95%+ PCP compressors. Pressure Maintaining Function: It is its patent design. It initiates air supply to the pcp tank only when the pressure reaches about 1800- 2000 psi. This feature enhances oil-water filtration efficiency. Pro Tip: Always connect compressor hose to “INLET” port. Two Mounting Choices: 1, Secure Magnetic Mounting: The filter’s side panel features three pre-drilled screw holes. Simply install two included industrial-strength magnets (screws provided) for ultra-stable adhesion to your compressor body. 2, Drilling and Screw. Notice: When used with CS3-I or CS4-I models equipped with built-in converter, strong magnets may interfere with the power components. It is recommended to keep magnets clear of the built-in converter area. Refer to pictures which showing the area. Features a dimension of 260mmx50mm (10.23″x1.97″) with 9.68mm wall thickness and 50mm outer diameter, coupled with a 21.65-inch hose. Designed for PCP compressors. The set includes a GX filter, hose, 5 replacement cottons, and a spare filter element plus one. Notice: Do not loosen the small nut at the top, which is a nut set before leaving the factory and is used to set the output pressure of the pressure-maintaining valve. In the future, you only need to remove the large nut with holes to replace the filter elemen. Recommended Uses For Product. Hose, filter, replacement filter element. 2″L x 2.01″W x 10.2H. High-Pressure Accessory, Heavy-Duty, Stationary. Package contents are based on the product information shown above. Please confirm compatibility, measurements, and required specifications before ordering. Customer Care & Fulfillment. We’ll always do our best to resolve the issue quickly and fairly. As a small business, your support truly means a lot to us. ? Your satisfaction is very important, and we will always work hard to make things right and provide you with the best possible shopping experience.