https://windcompressorpumps.com Sat, 14 Nov 2026 12:59:49 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://windcompressorpumps.com/2026/11/14/replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-usa-5/ https://windcompressorpumps.com/2026/11/14/replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-usa-5/#comments Sat, 14 Nov 2026 12:59:49 +0000 https://windcompressorpumps.com/2026/11/14/replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-usa-5/ Read More]]>


















Specification Color: Black Material: Cast Iron, Aluminum Power Source: Electric Cylinder: 65mm3 Maximum Working Pressure: 0.8MPa/115PSI Maximum Speed: 1030rpm (Matching the Overall Machine Speed) Exhaust Volume: 0.36m³/min/12.7cfm Pipe Interface: 19mm/ 3/4in Matching Motor Power: 3KW/4HP Gross Weight: 21kg/46.29 lbs Package Size: 443338cm/17.3212.9914.96in Package Included 1Air Compressor Pump 3Air Filter Mufflers. Replacement Air Compressor Pump 3 Cylinder 10-12 CFM Max For industry USA. This air compressor pump has high hardness, tensile strength, and compression. Allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency. Maximum Working Pressure: 0.8MPa/115PSI. Maximum Speed: 1030rpm (Matching the Overall Machine Speed). Exhaust Volume: 0.36m³/min/12.7cfm. Pipe Interface: 19mm/ 3/4in. Matching Motor Power: 3KW/4HP. Gross Weight: 21kg/46.29 lbs. 17.3212.9914.96. Made of cast iron and aluminum with high strength and good rigidity, together with a painting finish, it is. To wear, corrosion, and rust, ensuring excellent performance and long service life. It can provide gas supply to multiple devices simultaneously by controlling the switches of different pump heads, avoiding single-point faults affecting the entire production line and improving gas supply efficiency. The large crankcase makes the machine run smoother and less prone to oil leakage during operation. Increases the stroke to achieve rapid inflation. Compared to compressors with a single pump head, multiple pump heads can reduce the pressure and flow rate of each pump head, thereby reducing the power and energy consumption of the compressor. The dual iron breathing nozzles reduce the internal pressure and temperature of the machine. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host. The air filter with a silencing function makes it operate at low noise. Providing you with a relatively quiet working environment. The integrated structure and pre-drilled. On the base allow for easy installation. To prevent the product from being damaged during transportation, we packed it with sponges and cloth to protect your products to the maximum extent possible. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. It helps to achieve convenient and tight connections to avoid oil leakage. It plays a balance and correction role to avoid bearing displacement, making the machine run smoother. It is widely used in the chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research, etc. Note: The pulley speed should not exceed 1000r/min. It should match the motor power. Please pay attention to the product specifications before ordering. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration. After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt. The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time. The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time. Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month. The operation of the machine will produce high temperature, please be careful not to burn! Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://windcompressorpumps.com/2026/11/14/replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-usa-5/feed/ 0 https://windcompressorpumps.com/2026/11/13/pcp-air-compressor-built-in-power-converter-portable-4500psi30mpa-wateroil/ https://windcompressorpumps.com/2026/11/13/pcp-air-compressor-built-in-power-converter-portable-4500psi30mpa-wateroil/#comments Sat, 14 Nov 2026 00:58:02 +0000 https://windcompressorpumps.com/2026/11/13/pcp-air-compressor-built-in-power-converter-portable-4500psi30mpa-wateroil/ Read More]]>










PCP Air Compressor, Built-in Power Converter, Portable 4500Psi/30Mpa, Water/Oil-Free, PCP Paintball Tank Air Pump, Powered by 12V Car DC or Home 110V AC with Oil-Moisture Filter. Upgraded BUILT-IN POWER ADAPTER: This portable air compressor has a built-in converter and manual stop button to support AC 110V or DC 12V power is easy to inflate your PCP air device no matter at home or on the training factory default setting is AC Pay attention to the current powered by the battery, the current range should be lower than maximum inflation pressure is 30M Pa/4500PSI. It is recommended that the air cylinder volume is to 1L (60ci). Water/Oil-Free & Oil-Moisture Filter: No trouble of externally circulating cooling water or adding oil. Instead, a high-power side fan with a speed up to 13500r/min to dissipate the multiple vents on the shell can cool the compressor in different are just to ensure that this PCP air pump can maintain long last stable oil-moisture filter has been integrated at one end of the can efficiently prevent oil and moisture from corroding air items or air tanks. 8mm Fast Disconnecting Fitting & Powerful Air Compressor: Both ends of the hose are 8mm FOSTER female connectors, which can directly fit the male nozzles of most PCP air rifles and paintball cylinders. The rated power of this air compressor is 350W. Inflating Speed: 500CC tank, from 200BARS to 300BARS takes about 8 minutes; from 0BARS to 300BARS takes about 20 minutes. The duty cycle of this pump is: continuous inflation for 25 minutes and rest for 10 minutes. Don’t over-charge your air device. Simple Connection & Increased Security: The input voltage of the power converter has been set to 110v and the ports of the converter have been connected. All left to do is simply inserting. The quick disconnect fitting can easily connect the compressor. This compressor has a withstanding 60Mpa hose and a temperature display, which can timely monitor the temperature inside. When reaching 80 degrees, stop filling and restart the compressor after cooling down. Light Weight & Compact Size & 12 s satisfaction: The net weight is just kg. And the top side is only slightly larger than your open palm. It can be easily held up with one hand and very convenient to carry and store. However, its pump capacity is very powerful. With this compressor, you can fully enjoy airgun games whether at home or in the field. Every compressor from us has a one- satisfaction. Providing customers with high-quality products and services is our constant pursuit.

]]> https://windcompressorpumps.com/2026/11/13/pcp-air-compressor-built-in-power-converter-portable-4500psi30mpa-wateroil/feed/ 0 https://windcompressorpumps.com/2026/11/13/best-tire-pump-for-the-price-ep-auto-air-compressor-review-amazon-car-tire-inflator-under-40/ https://windcompressorpumps.com/2026/11/13/best-tire-pump-for-the-price-ep-auto-air-compressor-review-amazon-car-tire-inflator-under-40/#comments Fri, 13 Nov 2026 12:56:32 +0000 https://windcompressorpumps.com/2026/11/13/best-tire-pump-for-the-price-ep-auto-air-compressor-review-amazon-car-tire-inflator-under-40/ ]]> https://windcompressorpumps.com/2026/11/13/best-tire-pump-for-the-price-ep-auto-air-compressor-review-amazon-car-tire-inflator-under-40/feed/ 0 https://windcompressorpumps.com/2026/11/12/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-123/ https://windcompressorpumps.com/2026/11/12/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-123/#comments Fri, 13 Nov 2026 00:55:02 +0000 https://windcompressorpumps.com/2026/11/12/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-123/ Read More]]>
























Note: The pulley speed should not exceed 1000r/min. This air compressor pump has high hardness, tensile strength, and compression resistance, allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency. Sturdy and Durable : Made of cast iron and aluminum with high strength and good rigidity, together with a painting finish, it is resistant to wear, corrosion, and rust, ensuring excellent performance and long service life. Improving Efficiency : It can provide gas supply to multiple devices simultaneously by controlling the switches of different pump heads, avoiding single-point faults affecting the entire production line and improving gas supply efficiency. Excellent Performance : The large crankcase makes the machine run smoother and less prone to oil leakage during operation. The extended cylinder(65mm in diameter)increases the stroke to achieve rapid inflation. Low Energy Consumption : Compared to compressors with a single pump head, multiple pump heads can reduce the pressure and flow rate of each pump head, thereby reducing the power and energy consumption of the compressor. Faster Heat Dissipation : The dual iron breathing nozzles reduce the internal pressure and temperature of the machine. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host. Low Noise : The air filter with a silencing function makes it operate at low noise, providing you with a relatively quiet working environment. Simple Installation : The integrated structure and pre-drilled holes on the base allow for easy installation. Protective Packaging : To prevent the product from being damaged during transportation, we packed it with sponges and cloth to protect your products to the maximum extent possible. Guaranteed Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Threaded Oil Cap: It helps to achieve convenient and tight connections to avoid oil leakage. Standard Pulley : It plays a balance and correction role to avoid bearing displacement, making the machine run smoother. It is widely used in the chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research, etc. Material: Cast Iron, Aluminum. Maximum Working Pressure: 0.8MPa/115PSI. Maximum Speed: 1030rpm (Matching the Overall Machine Speed). Exhaust Volume: 0.36m³/min/12.7cfm. Pipe Interface: 19mm/ 3/4in. Matching Motor Power: 3KW/4HP. Gross Weight: 21kg/46.29 lbs. Package Size: 443338cm/17.3212.9914.96in. 3Air Filter Muffler s. It should match the motor power. Please pay attention to the product specifications before ordering. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration. After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt. The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time. The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time. Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month. The operation of the machine will produce high temperature, please be careful not to burn! Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://windcompressorpumps.com/2026/11/12/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-123/feed/ 0 https://windcompressorpumps.com/2026/11/12/gx-pump-gx-e-cs4-i-pcp-air-compressor-review/ https://windcompressorpumps.com/2026/11/12/gx-pump-gx-e-cs4-i-pcp-air-compressor-review/#comments Thu, 12 Nov 2026 12:53:46 +0000 https://windcompressorpumps.com/2026/11/12/gx-pump-gx-e-cs4-i-pcp-air-compressor-review/ ]]> https://windcompressorpumps.com/2026/11/12/gx-pump-gx-e-cs4-i-pcp-air-compressor-review/feed/ 0 https://windcompressorpumps.com/2026/11/11/4-5-hp-replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-9/ https://windcompressorpumps.com/2026/11/11/4-5-hp-replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-9/#comments Thu, 12 Nov 2026 00:52:46 +0000 https://windcompressorpumps.com/2026/11/11/4-5-hp-replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-9/ Read More]]>















Specification Color: Black Material: Cast Iron, Aluminum Power Source: Electric Cylinder: 65mm3 Maximum Working Pressure: 0.8MPa/115PSI Maximum Speed: 1030rpm (Matching the Overall Machine Speed) Exhaust Volume: 0.36m³/min/12.7cfm Pipe Interface: 19mm/ 3/4in Matching Motor Power: 3KW/4HP Gross Weight: 21kg/46.29 lbs Package Size: 443338cm/17.3212.9914.96in Package Included 1Air Compressor Pump 3Air Filter Mufflers. 4 – 5 HP Replacement Air Compressor Pump 3 Cylinder 10-12 CFM Max For industry. This air compressor pump has high hardness, tensile strength, and compression. Allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency. Made of cast iron and aluminum with high strength and good rigidity, together with a painting finish, it is. To wear, corrosion, and rust, ensuring excellent performance and long service life. It can provide gas supply to multiple devices simultaneously by controlling the switches of different pump heads, avoiding single-point faults affecting the entire production line and improving gas supply efficiency. The large crankcase makes the machine run smoother and less prone to oil leakage during operation. Increases the stroke to achieve rapid inflation. Compared to compressors with a single pump head, multiple pump heads can reduce the pressure and flow rate of each pump head, thereby reducing the power and energy consumption of the compressor. The dual iron breathing nozzles reduce the internal pressure and temperature of the machine. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host. The air filter with a silencing function makes it operate at low noise. Providing you with a relatively quiet working environment. The integrated structure and pre-drilled. On the base allow for easy installation. To prevent the product from being damaged during transportation, we packed it with sponges and cloth to protect your products to the maximum extent possible. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. It helps to achieve convenient and tight connections to avoid oil leakage. It plays a balance and correction role to avoid bearing displacement, making the machine run smoother. It is widely used in the chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research, etc. Maximum Working Pressure: 0.8MPa/115PSI. Maximum Speed: 1030rpm (Matching the Overall Machine Speed). Exhaust Volume: 0.36m³/min/12.7cfm. Pipe Interface: 19mm/ 3/4in. Matching Motor Power: 3KW/4HP. Gross Weight: 21kg/46.29 lbs. 17.3212.9914.96. Note: The pulley speed should not exceed 1000r/min. It should match the motor power. Please pay attention to the product specifications before ordering. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration. After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt. The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time. The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time. Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month. The operation of the machine will produce high temperature, please be careful not to burn! Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://windcompressorpumps.com/2026/11/11/4-5-hp-replacement-air-compressor-pump-3-cylinder-10-12-cfm-max-for-industry-9/feed/ 0 https://windcompressorpumps.com/2026/11/11/vevor-pcp-air-compressor-4500psi30mpa-pcp-airgun-compressor-built-in-converter/ https://windcompressorpumps.com/2026/11/11/vevor-pcp-air-compressor-4500psi30mpa-pcp-airgun-compressor-built-in-converter/#comments Wed, 11 Nov 2026 12:51:01 +0000 https://windcompressorpumps.com/2026/11/11/vevor-pcp-air-compressor-4500psi30mpa-pcp-airgun-compressor-built-in-converter/ Read More]]>













Inflate Smarter and Faster, Ready for Your Adventure. Enjoy reliable air supply anytime, anywhere with our PCP air compressor. With built-in converter, it provides DC12V and AC120V dual charging options. Enjoy rapid and stable inflation with 4500PSI/30Mpa max pressure, built-in fan cooling system, and a real-time temperature and pressure display. This 250W PCP airgun pump efficiently fills a 0.5L air cylinder from 0 to 300bar in just 20 minutes, saving time and keeping you prepared for your next adventure. Equipped with a built-in fan cooling system, this paintball tank air pump ensures rapid heat dissipation without the need for an external water pump. Its powerful performance and quick cooling make it reliable and easy to use for your inflation needs. With a built-in converter, this PCP air rifle compressor adapts to your needs. Use it outdoors with a DC12V car battery or at home with an AC120V power socket, offering ultimate flexibility wherever you are. This portable PCP compressor is compact, lightweight and easy to carry. It comes with a convenient carrying handle, and you can take it with you wherever you go, whether at home or outdoors, without the burden of heavy equipment. Fast and Stable Inflation: Say goodbye to long waiting times. Our 250W PCP air compressor can effortlessly fill a 0.5L air cylinder from 0 to 300bar in just 20 minutes, providing rapid inflation for your paintball guns, PCP guns, and scuba diving bottles. When the required pressure is reached, simply turn off the switch manually. Smart Dual Display: Our portable PCP compressor features an intelligent dual display system that provides real-time pressure and temperature readings. With 4500PSI/30Mpa maximum pressure, it perfectly meets the needs of various airguns. Maximum Temperature: 80? / 176? . Versatile Home and Outdoor Use: With a built-in power converter, this PCP air rifle compressor can be powered both by AC120V socket at home and 12V car battery outdoors. Get this compact air pump, whether you’re at home or out in the wild, power is always within reach. Built-in Fan Cooling System: The PCP airgun compressor features an advanced fan cooling system for superior heat dissipation-no external water pump needed. The high-speed cooling fan effectively prevents overheating, ensuring optimal performance and extended product service life. Comprehensive All-in-One Package: Our oil & water free paintball tank air pump provides 8mm quick-connect high-pressure hose, battery clamp, and a set of accessory pack for easy connections and replacements. Note: When inflating the scuba diving tank, please connect an external air filter. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault.

]]> https://windcompressorpumps.com/2026/11/11/vevor-pcp-air-compressor-4500psi30mpa-pcp-airgun-compressor-built-in-converter/feed/ 0 https://windcompressorpumps.com/2026/11/10/13-gallon-ultra-quiet-air-compressor-3-74hp-6cfm-115psi-oil-free-110v-portable/ https://windcompressorpumps.com/2026/11/10/13-gallon-ultra-quiet-air-compressor-3-74hp-6cfm-115psi-oil-free-110v-portable/#comments Wed, 11 Nov 2026 00:49:54 +0000 https://windcompressorpumps.com/2026/11/10/13-gallon-ultra-quiet-air-compressor-3-74hp-6cfm-115psi-oil-free-110v-portable/ Read More]]>








13 Gallon Air Compressor. Upgrade your garage or workshop with this 13 Gallon Oil-Free Air Compressor, combining larger air storage with powerful airflow for a wider range of pneumatic applications. The 3.74 HP motor system delivers up to 115 PSI and an impressive 6 CFM at 90 PSI, providing strong performance for tire inflation, pneumatic tools, woodworking, nailing, blow cleaning, and light spray painting. The larger 13 gallon steel tank provides more stored air than compact compressors, helping support longer working sessions with fewer interruptions. Operating at approximately 70 dB, the compressor is designed to deliver strong airflow while keeping operating noise more manageable in garages and workshops. Its oil-free design reduces routine maintenance, while the pressure regulator, outlet pressure gauge, safety valve, industrial air filters, and mufflers provide convenient control and everyday usability. Large wheels and an integrated handle make the unit easier to reposition around your workspace. 13 Gallon Large-Capacity Steel Tank. 3.74 HP Motor System. 6 CFM at 90 PSI High Airflow. Up to 115 PSI Working Pressure. 70 dB Quiet Operation. Pressure Regulator & Outlet Pressure Gauge. Integrated Handle & Large Wheels. Suitable for Garage, Automotive, Woodworking & Workshop Applications. Specifications: 110V / 60Hz, 3450 RPM, approximately 64 lbs, size approximately 25.6″ L × 12.2″ W × 23.8 H.

]]> https://windcompressorpumps.com/2026/11/10/13-gallon-ultra-quiet-air-compressor-3-74hp-6cfm-115psi-oil-free-110v-portable/feed/ 0 https://windcompressorpumps.com/2026/11/10/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-cylinder-head/ https://windcompressorpumps.com/2026/11/10/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-cylinder-head/#comments Tue, 10 Nov 2026 12:48:48 +0000 https://windcompressorpumps.com/2026/11/10/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-cylinder-head/ Read More]]>
























Note: The pulley speed should not exceed 1000r/min. This air compressor pump has high hardness, tensile strength, and compression resistance, allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency. Sturdy and Durable : Made of cast iron and aluminum with high strength and good rigidity, together with a painting finish, it is resistant to wear, corrosion, and rust, ensuring excellent performance and long service life. Improving Efficiency : It can provide gas supply to multiple devices simultaneously by controlling the switches of different pump heads, avoiding single-point faults affecting the entire production line and improving gas supply efficiency. Excellent Performance : The large crankcase makes the machine run smoother and less prone to oil leakage during operation. The extended cylinder(65mm in diameter)increases the stroke to achieve rapid inflation. Low Energy Consumption : Compared to compressors with a single pump head, multiple pump heads can reduce the pressure and flow rate of each pump head, thereby reducing the power and energy consumption of the compressor. Faster Heat Dissipation : The dual iron breathing nozzles reduce the internal pressure and temperature of the machine. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host. Low Noise : The air filter with a silencing function makes it operate at low noise, providing you with a relatively quiet working environment. Simple Installation : The integrated structure and pre-drilled holes on the base allow for easy installation. Protective Packaging : To prevent the product from being damaged during transportation, we packed it with sponges and cloth to protect your products to the maximum extent possible. Guaranteed Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Threaded Oil Cap: It helps to achieve convenient and tight connections to avoid oil leakage. Standard Pulley : It plays a balance and correction role to avoid bearing displacement, making the machine run smoother. It is widely used in the chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research, etc. Material: Cast Iron, Aluminum. Maximum Working Pressure: 0.8MPa/115PSI. Maximum Speed: 1030rpm (Matching the Overall Machine Speed). Exhaust Volume: 0.36m³/min/12.7cfm. Pipe Interface: 19mm/ 3/4in. Matching Motor Power: 3KW/4HP. Gross Weight: 21kg/46.29 lbs. Package Size: 443338cm/17.3212.9914.96in. 3Air Filter Muffler s. It should match the motor power. Please pay attention to the product specifications before ordering. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration. After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt. The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time. The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time. Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month. The operation of the machine will produce high temperature, please be careful not to burn! Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://windcompressorpumps.com/2026/11/10/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-cylinder-head/feed/ 0 https://windcompressorpumps.com/2026/11/09/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-122/ https://windcompressorpumps.com/2026/11/09/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-122/#comments Tue, 10 Nov 2026 00:47:49 +0000 https://windcompressorpumps.com/2026/11/09/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-122/ Read More]]>

























5-HP Single-Stage Inline-Twin Replacement Air Compressor Pump 3 3 Cylinder Head. Note: The pulley speed should not exceed 1000r/min. This air compressor pump has high hardness, tensile strength, and compression resistance, allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency. Sturdy and Durable : Made of cast iron and aluminum with high strength and good rigidity, together with a painting finish, it is resistant to wear, corrosion, and rust, ensuring excellent performance and long service life. Improving Efficiency : It can provide gas supply to multiple devices simultaneously by controlling the switches of different pump heads, avoiding single-point faults affecting the entire production line and improving gas supply efficiency. Excellent Performance : The large crankcase makes the machine run smoother and less prone to oil leakage during operation. The extended cylinder(65mm in diameter)increases the stroke to achieve rapid inflation. Low Energy Consumption : Compared to compressors with a single pump head, multiple pump heads can reduce the pressure and flow rate of each pump head, thereby reducing the power and energy consumption of the compressor. Faster Heat Dissipation : The dual iron breathing nozzles reduce the internal pressure and temperature of the machine. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host. Low Noise : The air filter with a silencing function makes it operate at low noise, providing you with a relatively quiet working environment. Simple Installation : The integrated structure and pre-drilled holes on the base allow for easy installation. Protective Packaging : To prevent the product from being damaged during transportation, we packed it with sponges and cloth to protect your products to the maximum extent possible. Guaranteed Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Threaded Oil Cap: It helps to achieve convenient and tight connections to avoid oil leakage. Standard Pulley : It plays a balance and correction role to avoid bearing displacement, making the machine run smoother. It is widely used in the chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research, etc. Material: Cast Iron, Aluminum. Maximum Working Pressure: 0.8MPa/115PSI. Maximum Speed: 1030rpm (Matching the Overall Machine Speed). Exhaust Volume: 0.36m³/min/12.7cfm. Pipe Interface: 19mm/ 3/4in. Matching Motor Power: 3KW/4HP. Gross Weight: 21kg/46.29 lbs. Package Size: 443338cm/17.3212.9914.96in. 3Air Filter Muffler s. It should match the motor power. Please pay attention to the product specifications before ordering. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration. After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt. The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time. The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time. Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month. The operation of the machine will produce high temperature, please be careful not to burn! Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://windcompressorpumps.com/2026/11/09/5-hp-single-stage-inline-twin-replacement-air-compressor-pump-3-3-cylinder-head-122/feed/ 0