https://windcompressorpumps.com Wed, 15 Jul 2026 07:13:25 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://windcompressorpumps.com/2026/07/07/5-hp-two-stage-cast-iron-air-compressor-pump-dual-cylinder-inline-20-cfm/ https://windcompressorpumps.com/2026/07/07/5-hp-two-stage-cast-iron-air-compressor-pump-dual-cylinder-inline-20-cfm/#comments Tue, 07 Jul 2026 06:53:47 +0000 https://windcompressorpumps.com/2026/07/07/5-hp-two-stage-cast-iron-air-compressor-pump-dual-cylinder-inline-20-cfm/ Read More]]>











Schulz 5 HP Two-Stage Industrial-Grade Air Compressor Pump. Requires a 5 HP electric motor for proper operation. Includes: (1) Solberg Air Intake Filter Assembly with #14 Air Filter. 2 Quarts of Compressor Oil / Lubricant. Mounting Bolts & Hardware NOT Included. If you need a motor pulley, we’ve got you covered: For electric motors operating near 1750 RPM, use. For electric motors operating near 3450 RPM, use. Upgrade your workshop with the Schulz MSL20Max Air Compressor Pump – a robust, high-performance unit built to handle the toughest tasks with maximum efficiency. Designed for professionals who demand durability and reliability, this cast-iron pump delivers consistent airflow and long service life, even in high-duty-cycle environments. Featuring splash-type lubrication, oversized fins for superior heat dissipation, and precision-balanced components, the MSL20Max ensures smooth operation and reduced maintenance downtime. CCW (counter clockwise) ONLY. When viewed from the Flywheel side. Heavy-Duty Cast-Iron Construction – Built to last under continuous use and extreme conditions. Dual-Cylinder, Two-Stage Design – Efficient compression with higher pressure capabilities for demanding tasks. High Displacement Output – Delivers up to 20 CFM for powerful, consistent airflow. Low RPM Operation – Reduces noise and wear for smoother, quieter performance. Solberg air intake filter assembly included. 2 Quarts of compressor oil / lubricant included. (Mounting Hardware NOT Included) Mounting Configurations may vary. We recommend using M8 20mm / M10 25mm Hex bolts, washers and nuts when mounting. Lengths from 1.25″ to 1.50″ depending on your specific application. To operate the MSL20Max pump at the recommended speed of 985 RPM, it’s essential to use the correctly sized electric motor pulley. For a 5HP electric motor rated around 1750 RPM. Use a motor pulley with a diameter between 9.00″ (min) and 9.50″ (max). For a 5HP electric motor rated around 3450 RPM. Use a motor pulley with a diameter between 4.50″ (min) and 5.00″ (max). We’ve Got You Covered. 9.25 Single Groove A-Section Pulley. Suitable for motors around 1750 RPM. 4.75 Single Groove A-Section Pulley. Suitable for motors around 3450 RPM.

]]> https://windcompressorpumps.com/2026/07/07/5-hp-two-stage-cast-iron-air-compressor-pump-dual-cylinder-inline-20-cfm/feed/ 0 https://windcompressorpumps.com/2019/08/23/5hp-air-compressor-pump-2-stage-inline/ https://windcompressorpumps.com/2019/08/23/5hp-air-compressor-pump-2-stage-inline/#comments Sat, 24 Aug 2019 03:12:42 +0000 http://windcompressorpumps.com/2019/08/23/5hp-air-compressor-pump-2-stage-inline/ Read More]]>


Solid cast iron Inline 2 stage piston series air compressor pump. Oil lubricated design to extend pump life. Ram-Tek solid steel, heavy-gauge rods, designed for maximum performance and durability. Cool-Tek the coolest running compressors in the industry. Air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek concentric disc valves deliver maximum air flow with low replacement costs. Easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Includes oil holds 2 quarts of oil. The item “5HP Air Compressor Pump 2 Stage Inline” is in sale since Monday, April 1, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Air Tools\Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Horse Power: 5HP
• Model: APP2I0524T
• Brand: Eaton
• Tank Capacity: 65.1-100 gal
• Power Source: Electric
• Voltage: 230 V

]]> https://windcompressorpumps.com/2019/08/23/5hp-air-compressor-pump-2-stage-inline/feed/ 0 https://windcompressorpumps.com/2017/07/21/industrial-polar-air-5hp-2-stage-inline-pump/ https://windcompressorpumps.com/2017/07/21/industrial-polar-air-5hp-2-stage-inline-pump/#comments Sat, 22 Jul 2017 04:54:12 +0000 http://windcompressorpumps.com/2017/07/21/industrial-polar-air-5hp-2-stage-inline-pump/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this pump are: 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This unit comes filled with oil and has filters on the unit. The item “Industrial! Polar Air! 5HP 2 Stage Inline Pump” is in sale since Monday, July 17, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Air Compressors & Blowers\Other Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2017/07/21/industrial-polar-air-5hp-2-stage-inline-pump/feed/ 0 https://windcompressorpumps.com/2017/07/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump-3/ https://windcompressorpumps.com/2017/07/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump-3/#comments Thu, 20 Jul 2017 16:43:22 +0000 http://windcompressorpumps.com/2017/07/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump-3/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this pump are: 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This unit comes filled with oil and has filters on the unit. The item “Brand New! Eaton Compressor! 5HP 2 Stage Inline Pump” is in sale since Monday, July 17, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Air Compressors & Blowers\Other Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2017/07/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump-3/feed/ 0 https://windcompressorpumps.com/2017/07/19/brand-new-polar-air-5hp-2-stage-inline-pump-2/ https://windcompressorpumps.com/2017/07/19/brand-new-polar-air-5hp-2-stage-inline-pump-2/#comments Wed, 19 Jul 2017 16:36:11 +0000 http://windcompressorpumps.com/2017/07/19/brand-new-polar-air-5hp-2-stage-inline-pump-2/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this pump are: 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This unit comes filled with oil and has filters on the unit. The item “Brand New! Polar Air! 5HP 2 Stage Inline Pump” is in sale since Monday, July 17, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Air Compressors & Blowers\Other Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2017/07/19/brand-new-polar-air-5hp-2-stage-inline-pump-2/feed/ 0 https://windcompressorpumps.com/2017/07/14/brand-new-polar-air-5hp-2-stage-inline-pump/ https://windcompressorpumps.com/2017/07/14/brand-new-polar-air-5hp-2-stage-inline-pump/#comments Sat, 15 Jul 2017 04:19:37 +0000 http://windcompressorpumps.com/2017/07/14/brand-new-polar-air-5hp-2-stage-inline-pump/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this pump are: 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This unit comes filled with oil and has filters on the unit. The item “Brand New! Polar Air! 5HP 2 Stage Inline Pump” is in sale since Thursday, July 06, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Air Compressors & Blowers\Other Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2017/07/14/brand-new-polar-air-5hp-2-stage-inline-pump/feed/ 0 https://windcompressorpumps.com/2017/06/29/brand-new-eaton-compressor-5hp-2-stage-inline-pump-2/ https://windcompressorpumps.com/2017/06/29/brand-new-eaton-compressor-5hp-2-stage-inline-pump-2/#comments Fri, 30 Jun 2017 00:52:04 +0000 http://windcompressorpumps.com/2017/06/29/brand-new-eaton-compressor-5hp-2-stage-inline-pump-2/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this pump are: 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This unit comes filled with oil and has filters on the unit. The item “Brand New! Eaton Compressor! 5HP 2 Stage Inline Pump” is in sale since Wednesday, June 28, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Air Compressors & Blowers\Other Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2017/06/29/brand-new-eaton-compressor-5hp-2-stage-inline-pump-2/feed/ 0 https://windcompressorpumps.com/2017/06/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump/ https://windcompressorpumps.com/2017/06/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump/#comments Wed, 21 Jun 2017 00:30:50 +0000 http://windcompressorpumps.com/2017/06/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this pump are: 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This unit comes filled with oil and has filters on the unit. The item “Brand New! Eaton Compressor! 5HP 2 Stage Inline Pump” is in sale since Monday, June 12, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Air Compressors & Blowers\Other Air Compressors”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2017/06/20/brand-new-eaton-compressor-5hp-2-stage-inline-pump/feed/ 0 https://windcompressorpumps.com/2016/11/19/5-hp-2-stage-inline-air-compressor-pump-by-eaton-3/ https://windcompressorpumps.com/2016/11/19/5-hp-2-stage-inline-air-compressor-pump-by-eaton-3/#comments Sat, 19 Nov 2016 08:49:20 +0000 http://windcompressorpumps.com/2016/11/19/5-hp-2-stage-inline-air-compressor-pump-by-eaton-3/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this 5 HP 2-Stage Inline Air Compressor Pump are : 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our 5 HP 2-Stage Inline Air Compressor Pump require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This 5 HP 2-Stage Inline Air Compressor Pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This 5 HP 2-Stage Inline Air Compressor Pump unit comes filled with oil and has filters on the unit. The item “5 HP 2-Stage Inline Air Compressor Pump by Eaton” is in sale since Friday, November 18, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Air Compressor Parts & Accs\Other Air Compressor Parts”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2016/11/19/5-hp-2-stage-inline-air-compressor-pump-by-eaton-3/feed/ 0 https://windcompressorpumps.com/2016/10/23/5-hp-2-stage-inline-air-compressor-pump-by-eaton-2/ https://windcompressorpumps.com/2016/10/23/5-hp-2-stage-inline-air-compressor-pump-by-eaton-2/#comments Mon, 24 Oct 2016 03:15:52 +0000 http://windcompressorpumps.com/2016/10/23/5-hp-2-stage-inline-air-compressor-pump-by-eaton-2/ Read More]]>


24CFM Air Compressor Pump. 5 HP Air Compressor Pump Specifications. Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability. Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life. Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability. Industrial grade ball bearing for maximum performance and extended pump life. Built-in head unloaders designed for continuous run applications. 7 ¾ by 7 ¾. Pump has a V-Style Pulley flywheel included on pump. Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates. Large Steel Automotive-Type Filters not plastic. Large site glass for viewing your oil level. Dimensions of this 5 HP 2-Stage Inline Air Compressor Pump are : 16 W x 14 D x 19 H , Flywheel O. Includes oil – holds 2 quarts of oil. Eaton Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our 5 HP 2-Stage Inline Air Compressor Pump require less maintenance, service and downtime than any other compressors in the Air Industrys. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop. Our Inline 5hp 2 stage Heavy Industrial air compressor. This 5 HP 2-Stage Inline Air Compressor Pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. This 5 hp air compressor pump DOES NOT have reed valves! It has a concentric ring valve design. Concentric ring valves have been around for over 150 years. We have not gone away from this design because it will last for many, many years to come. If you look at the competition, they all offer reed valves or finger valves, but both are the same thing, just called different by some manufacturers. No matter what they are called, reed valves are a cheap design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seatno head gasket to fool with when removing valves. Easy & quick to take in and out. This 5hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Many of the pumps you see on the market have one beltthis is twin belt. Twin belt ensures better belt gripage and longer belt life. 5 hp air compressor pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc. Under heavy duty cycles. This pump has a site glass to view your oil level. NO START-UP KIT REQUIRED!! This 5 HP 2-Stage Inline Air Compressor Pump unit comes filled with oil and has filters on the unit. The item “5 HP 2-Stage Inline Air Compressor Pump by Eaton” is in sale since Friday, October 14, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Air Compressor Parts & Accs\Other Air Compressor Parts”. The seller is “eatoncompressor” and is located in Clayton, Ohio. This item can be shipped to United States.

• Brand: Eaton
• MPN: APP2I0524T

]]> https://windcompressorpumps.com/2016/10/23/5-hp-2-stage-inline-air-compressor-pump-by-eaton-2/feed/ 0