https://windcompressorpumps.com Wed, 24 Jun 2026 18:22:07 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://windcompressorpumps.com/2021/01/25/yong-heng-4500psi-high-pressure-pcp-air-compressor-pump-set-pressure-auto-shut/ https://windcompressorpumps.com/2021/01/25/yong-heng-4500psi-high-pressure-pcp-air-compressor-pump-set-pressure-auto-shut/#comments Tue, 26 Jan 2021 04:06:30 +0000 http://windcompressorpumps.com/2021/01/25/yong-heng-4500psi-high-pressure-pcp-air-compressor-pump-set-pressure-auto-shut/ Read More]]>













High Pressure 30Mpa electric pump can be used for fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc. Thanks for your understanding! Take out the product; install the hose at the air outlet. Note: gasket is needed, or air leakage might exist. Connect 2 cold water pipes and connect them to the water pump. Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using. Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose. The blow-down valve is installed at the drain outlet of the first air chamber block. Immerse the water pump in water and switch on the power. Connect the container need to be inflated, make sure the connection is correct. Screw up the screws of the blow-down valve and pressure relief valve. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure. Air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine. Please use the power supply according to the parameter table. If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause. The product should be placed at a place that it couldn’ t be touched by children. Please do not use it in moist and flammable place. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed. Make sure the socket could withstand a currentgreater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket. Please do not touch the head section after the machine was just being used, so as to not beburnt by high temperature. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder. Temperature could be better controlled. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time. The product has you anticipated outstanding quality and convenience. The product is equipped with high pressure rubber hose, to apply to multipurpose use. Superimposed double-cylinder two-stage compression used by this product has the feature of large displacement, quick air inflation, which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles. One machine serves several purpose, with a wide application range. A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for cars, motorbike, electric vehicles and other vehicles. Range of application For fire fighting, diving, leakage detecting, pressure-tight test, automobiles, etc. The pressure value can be set arbitrarily, and it will stop automatically when it reaches the set pressure. Noise : Less than 78dB(A). Air Flow Rate : 40-50L/MIN; 1.5-1.8CFM. Cooling System : Water Cooling. Compression Stage : Two Stage. Electric motor: 110V 60hz, single phase. Material of Cover : Cast Aluminum. Shut down : Manual stop/automatic stop(for optional). Lubricating oil : ISO VG46 or AW 46. Air hose connection : 8mm quick connect fitting. 1 x 30Mpa Electric Compressor Pump. 1 x Water Pump. 2 x Water Pipe. 1 x Air cock. 2 x Pressure relief screw. 1 x Wearing parts. 1 x English Manual. Reason is because transit time is highly depended and provided by postal service except weekends and holidays. We offer 30 days return. We do our best to process as quickly as possible. The item “YONG HENG 4500PSI High Pressure PCP Air Compressor Pump Set-Pressure Auto Shut” is in sale since Friday, December 25, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “top-john” and is located in California. This item can be shipped to United States.

• Brand: YONG HENG
• MPN: Does Not Apply
• Type: High Pressure
• UPC: Does not apply
• EAN: Does not apply
• Shut down:: Manual stop/automatic stop(for optional)
• Working Pressure:: 100-300BAR; 1500-4500PSI

]]> https://windcompressorpumps.com/2021/01/25/yong-heng-4500psi-high-pressure-pcp-air-compressor-pump-set-pressure-auto-shut/feed/ 0 https://windcompressorpumps.com/2019/12/12/110v-30mpa-4500psi-2-5hp-set-pressure-air-compressor-pump-pcp-electric-high-pres/ https://windcompressorpumps.com/2019/12/12/110v-30mpa-4500psi-2-5hp-set-pressure-air-compressor-pump-pcp-electric-high-pres/#comments Thu, 12 Dec 2019 21:00:52 +0000 http://windcompressorpumps.com/2019/12/12/110v-30mpa-4500psi-2-5hp-set-pressure-air-compressor-pump-pcp-electric-high-pres/ Read More]]>






110V 30MPa 4500PSI 2.5HP Set-Pressure Air Compressor Pump PCP Electric High Pressure System Rifle brand new comes with original box and new tags. Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min;Practical test: 0.5 liter cylinder filled for 4 minutes to 300BAR/30MPA/4500PSI;Oil standard: IS0 VG 46 & AW 46. WIDE APPLICATION: Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc. PREMIUM QUALITY: Designed with two-stage compression and two water-oil separators for performance stability. It takes only 54 minutes to fill full 6.8L tank to 300BAR. COOLING SYSTEM: Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. The water in container should be no less than 20L/5 gallon. WORKING WITHOUT WATER IS FORBIDDEN! ATTENTION: The machine will Auto-Stop when the pressure reaches 300BAR/30MPAYou can set any pressure which less 300BAR/30MPA , When this set-pressure is reached, the machine will Auto-Stop. You will not have to turn it off manually, the machine will Auto-Stop. Notice: The temperature sensor is only compatible with AG13, 357A, CX157 and LR44W 1.5V batteries; batteries are NOT included and needs to be installed. Auctiva offers Free Image Hosting and Editing. Track Page Views With. Auctiva’s FREE Counter. The item “110V 30MPa 4500PSI 2.5HP Set-Pressure Air Compressor Pump PCP Electric High Pres” is in sale since Thursday, December 5, 2019. This item is in the category “Sporting Goods\Cycling\Bicycle Accessories\Pumps”. The seller is “alejtrejo-g-0″ and is located in Las Vegas, Nevada. This item can be shipped to United States.

• Brand: air pump
• MPN: Does not apply

]]> https://windcompressorpumps.com/2019/12/12/110v-30mpa-4500psi-2-5hp-set-pressure-air-compressor-pump-pcp-electric-high-pres/feed/ 0