https://windcompressorpumps.com Sun, 03 May 2026 02:15:48 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://windcompressorpumps.com/2018/07/31/5-zone-ductless-mini-split-air-conditioner-heat-pump-5-x-9-mitsubishi-compressor/ https://windcompressorpumps.com/2018/07/31/5-zone-ductless-mini-split-air-conditioner-heat-pump-5-x-9-mitsubishi-compressor/#comments Tue, 31 Jul 2018 08:45:55 +0000 http://windcompressorpumps.com/2018/07/31/5-zone-ductless-mini-split-air-conditioner-heat-pump-5-x-9-mitsubishi-compressor/ Read More]]>


Multi Zone Ductless Air Conditioner + Heat Pump (Mitsubishi Compressor). 5 Indoor Unit (9,000 + 9,000 +9000 + 9,000 + 9,000). Both Evaporator (indoor unit) and Condenser (outdoor unit) are Air-Con brand. (5) Indoor Units 9,000 16 SEER. Outdoor Unit 45,000 BTU 16 SEER. (5) Digital Remote Control. Ultimate in energy savings. Maximum Efficiency: 16 SEER. Pre-charged with Eco-friendly R410A refrigerant. Anticorrosive treatment in equipment components. Multifunction LCD wireless remote controls. Air purifying and deodorizer filter. 24 hour on/off timer. Good sleep cooling operation. Auto and 3 speeds fan control + Vertical auto-swing. The item “5 Zone Ductless Mini Split Air Conditioner Heat Pump 5 x 9 Mitsubishi Compressor” is in sale since Wednesday, July 11, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “ductless2000″ and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

• Size: 3.5 Tons
• Model: A16CM4H4R42
• Smart Home Compatibility: Wi-Fi
• Energy Star: Compliant
• Power Source: Electric
• Type: Split System
• Features: Heating & Cooling
• Cooling BTU/Hr: Split System
• Smart Home Protocol: Wi-Fi
• MPN: Does Not Apply
• SEER: 16
• Brand: Aircon
• Room Coverage Area: 2000 sqft

]]> https://windcompressorpumps.com/2018/07/31/5-zone-ductless-mini-split-air-conditioner-heat-pump-5-x-9-mitsubishi-compressor/feed/ 0 https://windcompressorpumps.com/2018/06/18/5-ton-dual-zone-ductless-split-air-conditioner-heat-pump-60000-btu-30000-x-2/ https://windcompressorpumps.com/2018/06/18/5-ton-dual-zone-ductless-split-air-conditioner-heat-pump-60000-btu-30000-x-2/#comments Mon, 18 Jun 2018 05:33:23 +0000 http://windcompressorpumps.com/2018/06/18/5-ton-dual-zone-ductless-split-air-conditioner-heat-pump-60000-btu-30000-x-2/ Read More]]>







60,000 BTU Dual Zone Ductless Mini Split AC. 60000 BTU Ductless Mini Split Air Conditioner. Dual Zone System w/ 60000 BTU Heat Pump. With a 60000 BTU total Cooling / HEATING Capacity, this Dual Zone mini split AC. Heat pump can cool or heat TWO separate zones (2 x 30000 BTU) for a total coverage area of 2600 ft². SEPARATE 1300 ft² AREAS. High seer efficiency provides the benefits of low operation temps, rapid cooling / heating, as well as maximum energy efficiency. R410A Pre-charged – 2 X 25′ Install kits Included. 60000 BTU Cooling Capacity. 62000 BTU Heat Pump Capacity. 13 SEER Efficiency Pre-charged w/ Eco-Friendly R-410A. Dual-Zone Setup (2 Air Handlers). Indoor Units – Air Handler. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. Dual Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Active Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged w/ R-410A Freon For 25′ [x2] of Piping. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Over Current and Thermal Protection. Flexible, Quick Installation – Easy Operation. With its integrated INTELLIGENT CONTROL system you can choose from a variety of functions and settings. The digital LED information display center of the indoor unit provides real-time information relative to the operation of the unit, and the environment. LCD Remote Controls x 2. Settings and features are conveniently controlled with 2 LCD Digital Remote Controls. 1 Included for Each Zone. High Efficiency and Environmentally Friendly. The R410A refrigerant enables high efficiency of the unit while preserving the ozone layer. This is another testament to our dedication to environmentally friendly products. Enlarges the heat dissipation surface area; enhancing the efficiency and making the unit more compact in size. Multi-dimensional wind-outlet and the dual swinging louvers will uniformly spread the cool air to reach every corner of room. Good Sleep Mode Operation. With the touch of a button, your ductless split air conditioner is set to automatically adjust the room temperature during your sleep. Superior Inner-Grooved Copper Tubing. Integrated Dual Particle Filter (Washable). Anti-mold dust/particle filters under the front panel cover provide for fresher air circulation. They are removable and washable. Saw Tooth Fan Wheel Design for Noise Reduction. The latest design adopts the air flow blades in the shape of saw teeth, which greatly reduces the vibration noises at the end of the vortex, ensuring a quiet operation of the unit. 25 Feet Flared Insulated Copper Tubing. 25 Feet Pipe Insulation. Drain Pipe (Connected to Indoor). Indoor Wall Mounting Bracket. Wire Harness Between Indoor & Outdoor. Remote Control w/ Wall Brackets & Batteries. Extend one or both of the two (2) included 25 foot line sets to a total length of 50 feet. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “5 TON Dual Zone Ductless Split Air Conditioner + Heat Pump, 60000 BTU 30000 x 2″ is in sale since Thursday, December 8, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in O’Fallon, Missouri. This item can be shipped to United States.

• Brand: YMGI
• MPN: Sanyo YMGI-T1 Compressor Mini Split AC, 60,000
• Type: Split System
• Cooling BTU/Hr: 60000
• SEER: 13
• Size: 5 tons
• Power Source: Electric
• Features: Ductless
• Energy Star: Not Compliant

]]> https://windcompressorpumps.com/2018/06/18/5-ton-dual-zone-ductless-split-air-conditioner-heat-pump-60000-btu-30000-x-2/feed/ 0 https://windcompressorpumps.com/2017/09/13/5-ton-tri-zone-ductless-mini-split-air-conditioner-heater-18000-24000-x-2-btu/ https://windcompressorpumps.com/2017/09/13/5-ton-tri-zone-ductless-mini-split-air-conditioner-heater-18000-24000-x-2-btu/#comments Wed, 13 Sep 2017 15:05:37 +0000 http://windcompressorpumps.com/2017/09/13/5-ton-tri-zone-ductless-mini-split-air-conditioner-heater-18000-24000-x-2-btu/ Read More]]>










5 Ton Tri Zone Mini Ductless Split Air Conditioner 60000 BTU. 66,000 BTU Ductless Mini Split AC. 16 SEER Efficiency w/ Heat Pump Technology. With a 66000 BTU total Cooling-Heating Capacity, this Inverter DC mini split. Includes LCD remotes and complete installation kits with 25′ [x3] of piping. 66000 BTU Cooling Capacity. 18k + 24k + 24k. 66000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER. TRI-Zone Setup (3 Air Handlers). Indoor Units – Air Handler. Outdoor Unit – Compressor rated at 60000 BTU’s. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. TRI Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Actv Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged with freon for 25′ [x3] of piping. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. 3300 ft² coverage area: 900 + 1200 + 1200. Flexible, Quick Installation – Easy Operation. 25 Feet Flared Insulated Copper Tubing. 25 Feet Pipe Insulation. Mounting Brackets for Indoor Unit. Putty to seal piping / holes. Wire Harness Between Indoor & Outdoor. Remote Control w/ Wall Brackets & Batteries. Extend one or two (4) included 25 foot line sets to a total length of 50 feet. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split See Installation Tip. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Swap 18k Wall Mount for Ceiling Cassettes. Swap 24k Wall Mount for Ceiling Cassettes. Swap all 3 Wall Mounts for Ceiling Cassettes. Swap 18k Wall Mount for Susp. Swap 24k Wall Mount for Susp. Swap all Wall Mounts for Susp. Customize your system to meet your requirements – see below table for available output options. 12k + 18k + 24k. 18k + 18k + 18k. 12k + 24k + 24k. 9k + 24k + 24k. 18k + 18k + 24k. 9k + 12k + 12k + 24k. 9k + 9k + 18k + 24k. 9k + 12k + 18k + 24k. 9k + 12k + 18k + 18k. 9k + 18k + 18k + 18k. 12k + 12k + 18k + 24k. 12k + 12k + 12k + 24k. 9k + 9k + 24k + 24k. 9K +9K +9K +9K + 12K/18K/24K. 9K + 9K + 9K + 12K + 12K/18K/24K. 9K + 9K + 12K +12K + 12K/18K/24K. 9K + 12K + 12K + 12K + 12K/18K. 12K + 12K + 12K + 12K + 12K/18K. 09K + 09K + 12K + 12K + 18K. 09K + 09K + 12K + 18K + 18K. 09K + 12K + 12K + 18K + 18K. 12K +12K + 12K + 18K + 18K. Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (60000 BTU’s) – the total output will not exceed 60000’s when all air handlers are running at full capacity simultaneously. However, overated zones will draw required capacity from other zones either running at lower settings or areas that have reached thermostat settings to obtain rated output. For example, with a 12k-12k-12k-12k- 18k configuration, the total output will be along the lines of 11k-11k-11k-11k-16k when all zones are running on high/full settings at the same time. However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-18k yield. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “5 TON Tri Zone Ductless Mini Split Air Conditioner Heater, 18000 + 24000 x 2 BTU” is in sale since Thursday, June 02, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in O’Fallon, Missouri. This item can be shipped to United States.

• Brand: YMGI
• MPN: Sanyo YMGI-T1 Compressor Mini AC Heat Pump, 60,00
• Type: Split System
• Cooling BTU/Hr: 60000
• SEER: 16

]]> https://windcompressorpumps.com/2017/09/13/5-ton-tri-zone-ductless-mini-split-air-conditioner-heater-18000-24000-x-2-btu/feed/ 0 https://windcompressorpumps.com/2017/08/29/5-ton-tri-zone-ductless-split-air-conditioner-60000-btu-18000-18000-24000/ https://windcompressorpumps.com/2017/08/29/5-ton-tri-zone-ductless-split-air-conditioner-60000-btu-18000-18000-24000/#comments Tue, 29 Aug 2017 14:13:28 +0000 http://windcompressorpumps.com/2017/08/29/5-ton-tri-zone-ductless-split-air-conditioner-60000-btu-18000-18000-24000/ Read More]]>









5 Ton Tri Zone Mini Ductless Split Air Conditioner 60000 BTU. 60,000 BTU Ductless Mini Split AC. 16 SEER Efficiency w/ Heat Pump Technology. With a 60000 BTU total Cooling-Heating Capacity, this Inverter DC mini split. Includes LCD remotes and complete installation kits with 25′ [x3] of piping. 60000 BTU Cooling Capacity. 18k + 18k + 24k. 60000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER. TRI-Zone Setup (3 Air Handlers). Indoor Units – Air Handler. Outdoor Unit – Compressor rated at 60000 BTU’s. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. TRI Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Actv Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged with freon for 25′ [x3] of piping. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. 2800 ft² coverage area: 850 + 850 + 1100. Flexible, Quick Installation – Easy Operation. 25 Feet Flared Insulated Copper Tubing. 25 Feet Pipe Insulation. Mounting Brackets for Indoor Unit. Putty to seal piping / holes. Wire Harness Between Indoor & Outdoor. Remote Control w/ Wall Brackets & Batteries. Extend one or two (4) included 25 foot line sets to a total length of 50 feet. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split See Installation Tip. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Swap 18k Wall Mount for Ceiling Cassettes. Swap 24k Wall Mount for Ceiling Cassettes. Swap all 3 Wall Mounts for Ceiling Cassettes. Swap 18k Wall Mount for Susp. Swap 24k Wall Mount for Susp. Swap all Wall Mounts for Susp. Customize your system to meet your requirements – see below table for available output options. 12k + 18k + 24k. 18k + 18k + 18k. 12k + 24k + 24k. 9k + 24k + 24k. 18k + 24k + 24k. 9k + 12k + 12k + 24k. 9k + 9k + 18k + 24k. 9k + 12k + 18k + 24k. 9k + 12k + 18k + 18k. 9k + 18k + 18k + 18k. 12k + 12k + 18k + 24k. 12k + 12k + 12k + 24k. 9k + 9k + 24k + 24k. 9K +9K +9K +9K + 12K/18K/24K. 9K + 9K + 9K + 12K + 12K/18K/24K. 9K + 9K + 12K +12K + 12K/18K/24K. 9K + 12K + 12K + 12K + 12K/18K. 12K + 12K + 12K + 12K + 12K/18K. 09K + 09K + 12K + 12K + 18K. 09K + 09K + 12K + 18K + 18K. 09K + 12K + 12K + 18K + 18K. 12K +12K + 12K + 18K + 18K. Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (60000 BTU’s) – the total output will not exceed 60000’s when all air handlers are running at full capacity simultaneously. However, overated zones will draw required capacity from other zones either running at lower settings or areas that have reached thermostat settings to obtain rated output. For example, with a 12k-12k-12k-12k- 18k configuration, the total output will be along the lines of 11k-11k-11k-11k-16k when all zones are running on high/full settings at the same time. However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-18k yield. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “5 TON Tri Zone Ductless Split Air Conditioner, 60000 BTU 18000 + 18000 + 24000″ is in sale since Sunday, November 03, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in O’Fallon, Missouri. This item can be shipped to United States.

• Brand: YMGI
• MPN: Sanyo YMGI-T1 Compressor Mini AC Heat Pump, 60,00
• Type: Split System
• Cooling BTU/Hr: 60000
• SEER: 16

]]> https://windcompressorpumps.com/2017/08/29/5-ton-tri-zone-ductless-split-air-conditioner-60000-btu-18000-18000-24000/feed/ 0 https://windcompressorpumps.com/2017/03/19/30000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-12000/ https://windcompressorpumps.com/2017/03/19/30000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-12000/#comments Sun, 19 Mar 2017 14:45:09 +0000 http://windcompressorpumps.com/2017/03/19/30000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-12000/ Read More]]>



30000 BTU Dual Zone Ductless Mini Split AC. 16 SEER Efficiency w/ Heat Pump Technology. With a 30000 BTU total Cooling / HEATING Capacity, this Dual Zone INVERTER mini split air conditioner can cool or heat 2 separate zones of 12000 and 18000 BTU for a total coverage area of 1400 ft² (600 + 800 ft²). 16 SEER coupled with Advanced Inverter DC technology provides the benefits of low operation temps, rapid cooling / heating as well as maximum energy efficiency. 30000 BTU Cooling Capacity. 30000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER / 8.2 HSPF. Dual-Zone Setup (2 Air Handlers). Indoor Units – Air Handler. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. Dual Air Handlers for Multi-Zone Placement. INVERTER DC TECHNOLOGY: 16 SEER. Washable Filters – Biologically Active Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged w/ R-410A Freon for upto 50′ of lineset. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Over Current and Thermal Protection. Flexible, Quick Installation – Easy Operation. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires (NOT INCLUDED) to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables (NOT INCLUDED). The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 2 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. 25′ Lineset kit (1/4 x 1/2). Extend your 25′ lineset to a 50′ run with this 25′ of extra piping. 3.2 Gallons per Hour Rate – 120 or 220 VAC options. Mount your condenser at any height on an outdoor sidewall. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “30000 BTU Dual Zone Ductless Mini Split Air Conditioner Heat Pump 18000 + 12000″ is in sale since Wednesday, May 04, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

• MPN: 30,000 BTU AC – Heat Pump: Mitsubishi Compressor
• Type: Split System
• Cooling BTU//Hr: 30000
• SEER: 16
• Brand: AirCon
• Energy Star: Not Compliant

]]> https://windcompressorpumps.com/2017/03/19/30000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-12000/feed/ 0 https://windcompressorpumps.com/2016/05/14/30000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9k-9k-12k/ https://windcompressorpumps.com/2016/05/14/30000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9k-9k-12k/#comments Sun, 15 May 2016 03:47:00 +0000 http://windcompressorpumps.com/2016/05/14/30000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9k-9k-12k/ Read More]]>








Mini Ductless Split Air Conditioner 30000 BTU. 30,000 BTU Tri-Zone Ductless Split AC. W/ 30,000 BTU Heat Pump. With a 30000 BTU total Cooling-Heating Capacity, this Inverter mini split. System can cool or heat 3 seperate zones [350 + 350 + 600 ft²] for a total coverage area of 1300 ft². Comes pre-charged with R-410A. 30000 BTU Cooling Capacity. (9000 x 2 + 12000). 30000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER. Tri-Zone Setup (3 Air Handlers). Indoor Units – Air Handler. Outdoor Unit – 33000 BTU Compressor. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. Tri Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Active Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged w/ R-410A Freon for upto 50′ of lineset. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Over Current and Thermal Protection. Flexible, Quick Installation – Easy Operation. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires (NOT INCLUDED) to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables (NOT INCLUDED). The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 2 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. 25′ Lineset kit (1/4 x 3/8). 16′ or 25′ refrigeration linesets REQUIRED for installation. 3.2 Gallons per Hour Rate – 120 or 220 VAC options. Mount your condenser at any height on an outdoor sidewall. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “30000 BTU Tri Zone Ductless Mini Split Air Conditioner, Heat Pump 9k + 9k + 12k” is in sale since Thursday, March 13, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

• Brand: Aircon
• MPN: 30000 BTU Mitsubishi Compressor Mini Split
• Type: Split System
• Cooling BTU/Hr: 30000
• SEER: 16

]]> https://windcompressorpumps.com/2016/05/14/30000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9k-9k-12k/feed/ 0 https://windcompressorpumps.com/2016/04/28/36000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-x-2/ https://windcompressorpumps.com/2016/04/28/36000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-x-2/#comments Fri, 29 Apr 2016 01:33:31 +0000 http://windcompressorpumps.com/2016/04/28/36000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-x-2/ Read More]]>



36000 BTU Dual Zone Ductless Mini Split AC. 16 SEER Efficiency w/ Heat Pump Technology. With a 36000 BTU combined Cooling / HEATING Capacity, this Dual Zone INVERTER mini split AC. Can cool or heat TWO separate zones (2 x 18000 BTU) for a total coverage area of 1600 ft² (800 ft² + 800 ft²). Inverter technology provides the benefits of low operation temps, rapid cooling / heating, as well as maximum energy efficiency. Pre-charged with eco-friendly R410A – 2 remotes included. 36000 BTU Cooling Capacity. 36000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER / 8.2 HSPF. Dual-Zone Setup (2 Air Handlers). Indoor Units – Air Handler. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. Dual Air Handlers for Multi-Zone Placement. INVERTER DC TECHNOLOGY: 16 SEER. Washable Filters – Biologically Active Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged w/ R-410A Freon for upto 50′ of lineset. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Over Current and Thermal Protection. Flexible, Quick Installation – Easy Operation. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires (NOT INCLUDED) to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables (NOT INCLUDED). The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 2 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. 25′ Lineset kit (1/4 x 1/2). Extend your 25′ lineset to a 50′ run with this 25′ of extra piping. 3.2 Gallons per Hour Rate – 120 or 220 VAC options. Mount your condenser at any height on an outdoor sidewall. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “36000 BTU Dual Zone Ductless Mini Split Air Conditioner Heat Pump 18000 x 2″ is in sale since Sunday, August 09, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

• MPN: 36,000 BTU AC – Heat Pump: Mitsubishi Compressor
• Type: Split System
• Cooling BTU/Hr: 36000
• SEER: 16

]]> https://windcompressorpumps.com/2016/04/28/36000-btu-dual-zone-ductless-mini-split-air-conditioner-heat-pump-18000-x-2/feed/ 0 https://windcompressorpumps.com/2015/11/27/27000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9000-btu-x-3/ https://windcompressorpumps.com/2015/11/27/27000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9000-btu-x-3/#comments Fri, 27 Nov 2015 15:23:24 +0000 http://windcompressorpumps.com/2015/11/27/27000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9000-btu-x-3/ Read More]]>









Thermocore 27000 BTU AC-Heat 19 SEER. 27000 BTU Tri Zone Energy Star Mini Split AC. 18.5 SEER Efficiency w/ Heat Pump Technology. With a 27000 BTU total Cool / Heat Capacity, the Thermocore T118D-H230-9+9+9 Energy Star mini split air conditioner can cool or heat 3 separate zones of 9000 BTU for a total coverage area of 1200 ft² (400 ft² x 3). Most Energy Efficient Tri-Zone series in the market! – A 19 SEER coupled with Inverter technology provides the benefits of low operation temps as well as maximum energy efficiency. 3 x 25ft Install kits included. 27,000 BTU INVERTER Heat Pump Capacity. 18.5 SEER – 9.0 HSPF – AHRI / ENERGY STAR Certified. Pre-Charged with ECO-Friendly R410A. Indoor Unit – Air Handler. Outdoor Unit – Condenser of 30,000 BTUs. Digital Multi-function LCD Remote Control. Installation Kit with 25′ x 3 of lineset. Product and Installation Manual. 18.5 SEER – 9.0 HSPF – ENERGY STAR. Most Energy Efficient Tri-Zone Series on Market. Dry-Mode removes moisture w/o affecting temp. Cross Flow Technology reduces noise output. Compatible with over 5 Filtration medias. Freon Leak Detection > Notification system. Low Ambient Temperature Operation (5° F). Two-direction Air vane Evenly Distributes Air. Restart IC: Settings restored Following Outage. Follow-Me Function tracks Remote Location. The particle filter or pre-filter removes dust and other air-borne pathogens before pushing the air through additional filtration medias and the refrigeration coil array. This filter is washable and comes factory installed with every ductless air conditioner system. The open channel construction of the 3M High Air Flow (HAF) filter offers low initial airflow resistance, while its unique microstructure and electrostatic charge provides effective particle capture and retention. This translates into fewer filter change outs and reduced coil cleaning. The Vitamin C Filtration media releases Vitamin C into the air which softens skin and reduces stress among other therapeutic benefits. A good choice for those wanting to add some invigoration to their indoor air environment. Filter lasts over 2 years. The anti-microbial effect of silver ionic technology kills allergy causing bacteria by destroying the inner configuration elements of the cell body. The nano-silver attached to the filter screen constantly releases silver ions which directly eliminates and prohibits bacteria from replicating. Eliminates odors such as ammonia and deactivates harmful chemicals has such as formaldehyde. By forming positive positions on the filter surface, Electrostatic Fiber traps small dust particles, smoke and pet dander to prevent allergic reactions and neutralize odor in the air. 230 V / 60 Hz / 1Ph. Dimensions (W x D x H). 32.9″ × 7.8″ × 11 inches. VIEW FULL AIR HANDLER SPECIFICATION SHEET >>>. 39000 BTU (9k + 12k + 18k). 5 – 122 F (cool and heat). R410A / 88.2oz Charge. 1/4″ x 3/8″ (3). Max Lineset Length (1 zone). Max Lineset Length (all zones). 35.43 × 12.4 × 33.9 inches. VIEW FULL CONDENSER SPECIFICATION SHEET >>>. 25 Feet Flared Copper Tubing. 25 Feet Pipe Insulation. Wall Bracket for Indoor Unit x 3. For Alternate lineset sizes. Installation and User Manuals. Extend included 25 foot copper lineset to 40-50-65 feet. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. Provides Flat even surface – Avoids debris obstruction. Lineset Extension (1/4 x 3/8). Extend included 16 ft copper lineset to 25ft – 30ft – 40ft – 50ft. Mount your condenser at any height on an outdoor sidewall. Required when mounting air handler on Interior wall. 16/4 Electrical Wire Harness – For Extending Evap. Spare remote controls for the T1 Series Ductless System. Inserts into Filter Screen Slot – Choice of 4 Filtration Medias. Permanently Hard Mounts – Controls Settings w/ Remote. Swap 1- 12k Mount for Cassette. Swap 2- 12k Mount for Cassette. Swap 1-12k Mount for Susp. Swap 2-12k Mount for Susp. And request invoice with preferred options. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “27000 BTU Tri Zone Ductless Mini Split Air Conditioner Heat Pump 9000 BTU x 3″ is in sale since Friday, March 21, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “gameroomfanatic” and is located in Oak Park, Michigan. This item can be shipped to United States, to Canada.

• Brand: Thermocore
• Model: 27000 BTU Mini Split AC w/ Mitsubishi Compressor
• MPN: 27000 BTU Mini Split AC w/ Mitsubishi Compressor
• Type: Split System
• Cooling BTU/Hr: 27000
• SEER: 16

]]> https://windcompressorpumps.com/2015/11/27/27000-btu-tri-zone-ductless-mini-split-air-conditioner-heat-pump-9000-btu-x-3/feed/ 0 https://windcompressorpumps.com/2015/11/26/tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-2-12k-with-25ft-linesets/ https://windcompressorpumps.com/2015/11/26/tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-2-12k-with-25ft-linesets/#comments Thu, 26 Nov 2015 15:03:22 +0000 http://windcompressorpumps.com/2015/11/26/tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-2-12k-with-25ft-linesets/ Read More]]>











Mini Ductless Split Air Conditioner 30000 BTU. 30,000 BTU Tri-Zone Ductless Split AC. W/ 30,000 BTU Heat Pump. With a 30000 BTU total Cooling-Heating Capacity, this Inverter mini split. System can cool or heat 3 seperate zones [350 + 350 + 600 ft²] for a total coverage area of 1300 ft². Comes pre-charged with R-410A. 3 x 25ft Installation kits included. 30000 BTU Cooling Capacity. (9000 x 2 + 12000). 30000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER. Tri-Zone Setup (3 Air Handlers). Indoor Units – Air Handler. Outdoor Unit – 33000 BTU Compressor. 25 ft Installation Kits. Piping / wiring. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. Tri Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Active Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged w/ R-410A Freon for upto 50′ of lineset. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Over Current and Thermal Protection. Flexible, Quick Installation – Easy Operation. 25 Feet Flared Insulated Copper Tubing. 25 Feet Pipe Insulation. Mounting Brackets for Indoor Unit x 3. Wire Harness Between Indoor & Outdoor. Remote Control w/ Wall Brackets & Batteries. Extend one or all included 25 foot line sets to a 35 ft or 50 ft run. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires (NOT INCLUDED) to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables (NOT INCLUDED). The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 2 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. 25′ Lineset kit (1/4 x 3/8). 16′ or 25′ refrigeration linesets REQUIRED for installation. 3.2 Gallons per Hour Rate – 120 or 220 VAC options. Mount your condenser at any height on an outdoor sidewall. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “Tri Zone Ductless Split Air Conditioner Heat Pump 9k x 2 + 12k with 25ft linesets” is in sale since Thursday, March 13, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

• Brand: Aircon
• MPN: 30000 BTU Mitsubishi Compressor Mini Split
• Type: Split System
• Cooling BTU/Hr: 30000
• SEER: 16

]]> https://windcompressorpumps.com/2015/11/26/tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-2-12k-with-25ft-linesets/feed/ 0 https://windcompressorpumps.com/2015/11/25/27000-btu-tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-3-25ft-kits/ https://windcompressorpumps.com/2015/11/25/27000-btu-tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-3-25ft-kits/#comments Thu, 26 Nov 2015 02:50:22 +0000 http://windcompressorpumps.com/2015/11/25/27000-btu-tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-3-25ft-kits/ Read More]]>













Mini Ductless Split Air Conditioner 27000 BTU. 27,000 BTU Tri-Zone Ductless Split AC. W/ 27,000 BTU Heat Pump. With a 27000 BTU total Cooling / HEATING Capacity, this Tri Zone INVERTER mini split air conditioner can cool or heat 3 separate 9000 BTU zones for a total coverage area of 1200 ft² (THREE 400 ft² areas). 16 SEER coupled with Advanced Inverter DC technology provides the benefits of low operation temps, rapid cooling / heating as well as maximum energy efficiency. 3 x 25ft Installation kits included. 27,000 BTU Cooling Capacity. (9,000 x 3). 27,000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 16 SEER. Tri-Zone Setup (3 Air Handlers). Indoor Units – Air Handler. Outdoor Unit – 33000 BTU Compressor. 25 ft Installation Kits. Piping / wiring. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. Tri Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Active Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged w/ R-410A Freon for upto 60′ of lineset. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Over Current and Thermal Protection. Flexible, Quick Installation – Easy Operation. 25 Feet Flared Insulated Copper Tubing. 25 Feet Pipe Insulation. Mounting Brackets for Indoor Unit x 3. Wire Harness Between Indoor & Outdoor. Remote Control w/ Wall Brackets & Batteries. Extend one or all included 25 foot line sets to a 35 ft or 50 ft run. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires (NOT INCLUDED) to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables (NOT INCLUDED). The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 5 Year Compressor – 2 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. 25′ Lineset kit (1/4 x 3/8). 16′ or 25′ refrigeration linesets REQUIRED for installation. 3.2 Gallons per Hour Rate – 120 or 220 VAC options. Mount your condenser at any height on an outdoor sidewall. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The free listing tool. The item “27000 BTU Tri Zone Ductless Split Air Conditioner, Heat Pump 9k x 3 25ft kits” is in sale since Friday, March 21, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “gameroomfanatic” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

• Brand: Aircon
• Model: 27000 BTU Mini Split AC w/ Mitsubishi Compressor
• MPN: 27000 BTU Mini Split AC w/ Mitsubishi Compressor
• Type: Split System
• Cooling BTU/Hr: 27000
• SEER: 16

]]> https://windcompressorpumps.com/2015/11/25/27000-btu-tri-zone-ductless-split-air-conditioner-heat-pump-9k-x-3-25ft-kits/feed/ 0